0
Mikrotik
0 –
10
of
18
Availability
Sort by
Advance Filters
Mikrotik
Mikrotik QMP Mikrotik quickMOUNT pro
The quickMOUNT pro is an advanced wall mount adapter for small point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment.The quickMOUNT pro gives possibility to turn antenna within 140° both in horizontal and vertical plane. With the quickMOUNT pro it is possible to perfectly set antenna alignment using integrated graduated scale.You can use the quickMOUNT pro with any pole mountable device or MikroTik's small mounting clip with weight less than 1.5 kg.The adapter is very durable due to itâs special plastic composite material - anvilNITE (TM).
Part# QMP
SKU S19454
In
Stock
Mikrotik
Mikrotik QM Mikrotik quickMOUNT
The quickMOUNT is a basic wall mount adapter for small point to point and sector antennas.You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT gives possibility to turn antenna within 190°.With the quickMOUNT it is possible to simultaneously mount two SXTs, thus creating a repeater access point or creating large sector coverage.
Part# QM
SKU S19454
In
Stock
Mikrotik
Mikrotik QM-X Mikrotik quickMOUNT-X
Recently weâve seen a demand for additional pole-mounting options for our popular SXTsq devices. You ask â we deliver! The new QM-X adapter enables vertical and horizontal adjustment on the pole.It is lightweight, easy to use, extremely durable and without any small parts that might break. Pick it up today for the price of a milkshake and enjoy simple positioning of your SXTsq devices like never before!
Part# QM-X
SKU S19454
In
Stock
Mikrotik
Mikrotik LHGmount Mikrotik LHG mount
The LHG mount is a basic pole mount adapter for LHG series products.
Part# LHGmount
SKU S19454
In
Stock
Mikrotik
Mikrotik QME Mikrotik quickMOUNT extra Grey
The quickMOUNT extra is a advanced wall mount adapter for large point to point and sector antennas.You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT extra gives possibility to turn antenna within 190°.With the quickMOUNT extra is compatible with our long range heavy antennas like 30dBi parabolic dish mANT 30 or 19dBi sector mANT 19s.
Part# QME
SKU S19454
In
Stock
Mikrotik
Mikrotik SXTsq-mount Mikrotik SXTsq-mount Grey
Attach it to the back of the SXTsq using a Ph1 screwdriver, mount everything on a pole using the provided U bolt and an 8 mm ratchet, then place the bolt in one of the three positions - these enable fine adjustments up to 45 degrees in both directions!
Part# SXTsq-mount
SKU S19454
In
Stock
Mikrotik
Mikrotik R11e-5HacD Mikrotik R11E-5HACD network card Internal RF Wireless
R11e-5HacD is our new 802.11ac card in miniPCI-express format, perfect for any RouterBOARD with miniPCIe slot, such as RB953, RB912, RB922, RB800 or x86 devices with RouterOS.The card features built-in LED indicators for wireless mode, connection status (connected, searching, disabled), TX and RX activity and wireless signal strength - just looking at the card will help with installation and alignment.
Part# R11e-5HacD
SKU S19454
In
Stock
Mikrotik
Mikrotik RMK-2/10 Mikrotik RMK-2/10 rack accessory Mounting bracket
RMK-2/10 allows installing two of the smaller MikroTik form-factor devices within traditional 19-inch racks, such as our neat and handy SR-10U!Alternatively, you can permanently remove a part of the bracket to install a single 200 mm device into a classic 10-inch rack.
Part# RMK-2/10
SKU S19454
In
Stock
Mikrotik
Mikrotik QMP-LDF Mikrotik QMP-LDF mounting kit White Composite, Plastic
An advanced pole/mast mount adapter for our LDF series â for extra ease of use and versatility. There are two standard mounting options and additional QMP compatibility for mounting LDF on a wall. The adapter offers extra durability due to its unique plastic composite material â anvilNITEâ¢.
Part# QMP-LDF
SKU S19454
In
Stock
Mikrotik
Mikrotik RB2011-H Mikrotik RB2011-H mounting kit
Wall mount kit for RB2011 desktop series, Protects cables, Powder coated steelThe RB2011 wall mount kit (product code RB2011-H) secures your RB2011 installation by protecting the cables from unplugging, ideal for public installations such as shared server rooms, attics, accessible closets and cabinets. Fits all standard RB2011 desktop cases (models RB2011iL-IN, RB2011iLS-IN, RB2011UiAS-IN and RB2011UiAS-2HnD-IN), protects all ten Ethernet ports, SFP port and Serial port.
Part# RB2011-H
SKU S19454
In
Stock
Item(s) added to cart
