Add-on Computers E1MG-L X-AO is a multi-mode transceiver is a small form factorpluggable module for bi-directional serial optical data communications such as GigabitEthernet 1000BASE-LX and Fiber Channel 1x SM-LX-L FC-Pl. This module is designedfor single-mode fiber and operates at a nominal wavelength of 1310nm.The transmitter section uses a multiple quantum well laser and is a class 1 lasercompliant, according to International Safety Standard IEC-60825. The receiver sectionuses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header anda limiting post-amplifier IC.

This Fortinet® FG-TRAN-LX compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) at a wavelength of 1310nm using a LC connector. Our transceiver is guaranteed to be 100% compatible with the equivalent Fortinet® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. It is built to meet or exceed the specifications of Fortinet®, as well as to comply with multi-source agreement (MSA) standards to ensure seamless network integration. We stand behind the quality of our products and proudly offer a limited lifetime warranty. Trade Agreements Act (TAA) versions of this part are available upon request.

This Cisco® GLC-GE-DR-LX compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It is guaranteed to be 100% compatible with the equivalent Cisco® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty.

This Cisco® GLC-SX-MM-2K compatible SFP transceiver provides 1000Base-MX throughput up to 2km over multi-mode fiber (MMF) at a wavelength of 1310nm using a LC connector. It is guaranteed to be 100% compatible with the equivalent Cisco® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. It is built to meet or exceed the specifications of Cisco®, as well as to comply with MSA (Multi-Source Agreement) standards to ensure seamless network integration. All of our transceivers are Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty.

Force10 Networks® GP-SFP2-1Y compatible 1000Base-LX SFP transceiver (SMF, 1310nm, 10km, LC). A 100% Force10 Networks® compatible SFP transceiver that operates at 1310nm over single-mode fiber, with a maximum reach of 10km connected via a LC connector. This Force10 Networks® SFP transceiver is 100% compliant with its designed networking application, and is factory programmed with Force10 Networks® specific configuration data required for seamless networking integration. This SFP transceiver will initialize and perform identically to Force10 Networks' transceiver and is built to meet or exceed Force10 Networks' specifications, and comply with MSA (Multi-Source Agreement) standards. The actual part shipped may have a different part number, but will be functionally identical and 100% compatible. Trade Agreements Act (TAA) versions of this part are available.

Our Optical Transceivers and Networking components for network router and switch equipment are individually tested and certified to meet or exceed OEM specifications for quality, functionality and performance.Whether it’s for Cisco, HP, Nortel, Juniper, or most any other major networking equipment manufacturer, we have an AddOn component that meets your needs.

Juniper Networks® QFX-SFP-1GE-LX compatible 1000Base-LX SFP transceiver (SMF, 1310nm, 10km, LC). A 100% Juniper Networks® compatible SFP transceiver that operates at 1310nm over single-mode fiber, with a maximum reach of 10km connected via a LC connector. This Juniper Networks® SFP transceiver is 100% compliant with its designed networking application, and is factory programmed with Juniper Networks® specific configuration data required for seamless networking integration. This SFP transceiver will initialize and perform identically to Juniper Networks' transceiver and is built to meet or exceed Juniper Networks' specifications, and comply with MSA (Multi-Source Agreement) standards. The actual part shipped may have a different part number, but will be functionally identical and 100% compatible. Trade Agreements Act (TAA) versions of this part are available.

Our Optical Transceivers and Networking components for network router and switch equipment are individually tested and certified to meet or exceed OEM specifications for quality, functionality and performance.Whether it’s for Cisco, HP, Nortel, Juniper, or most any other major networking equipment manufacturer, we have an AddOn component that meets your needs.

This Dell® SFP-1G-LX compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It is guaranteed to be 100% compatible with the equivalent Dell® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. It is built to meet or exceed the specifications of Dell®, as well as to comply with MSA (Multi-Source Agreement) standards to ensure seamless network integration. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty.

Meraki now Cisco® SFP-1GB-LX10 compatible 1000Base-LX SFP transceiver (SMF, 1310nm, 10km, LC). A 100% Meraki now Cisco® compatible SFP transceiver that operates at 1310nm over single-mode fiber, with a maximum reach of 10km connected via a LC connector. This Meraki now Cisco® SFP transceiver is 100% compliant with its designed networking application, and is factory programmed with Meraki now Cisco® specific configuration data required for seamless networking integration. This SFP transceiver will initialize and perform identically to Meraki now Cisco's transceiver and is built to meet or exceed Meraki now Cisco's specifications, and comply with MSA (Multi-Source Agreement) standards. The actual part shipped may have a different part number, but will be functionally identical and 100% compatible. Trade Agreements Act (TAA) versions of this part are available.