Easy UPS 3S 30 kVA 400 V 3:3 UPS for internal batteriesHigh-efficiency 3-phase UPS that features advanced product features, competitive specifications, and robust electrical design, making business continuity easy in the data center or electrical room. This is an exceptionally easy to install, operate, maintain, and service 30 kVA UPS, ideal for small and medium businesses. Includes dust filter and conformance-coated boards for harsh environments. This UPS is for internal batteries, but is supplied without batteries, so you can easily customize the battery runtime. For battery runtime details, see the runtime charts published under the Documents tab.

APC Easy UPS 3S. UPS topology: Double-conversion (Online), Output power capacity: 40 kVA, Output power: 40000 W. Serial interface type: RS-232. Form factor: Tower, Product colour: White, Display type: LCD. Width: 500 mm, Depth: 760 mm, Height: 1400 mm

Automatic Voltage Regulation (AVR)Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.Wall-mount holesAllow flexibility for setup in tight locations and mounting on wall or other surfaces.Battery and surge protected outletsBack up and protect your hardware and data during power outages, surges and spikes.Battery backup and surge protectionOutlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.Advanced Safety FeaturesSafeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenance.Cold-start capableProvides temporary battery power when the utility power is out.Boost Automatic Voltage Regulation (AVR)Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.Sleek designSlim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.Transformer-block spaced outletsProtect equipment with input transformer blocks without blocking access to other receptacles.Audible alarmsProvides notification of changing utility power and UPS power conditionsLED IndicatorsProvide easy-to-read status of the unit and utility power conditions.Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

This APC Smart-UPS is designed for IT professionals or network administrators to maintain business uptime and continuity. This 3kVA on-line 3U rackmount UPS provides pure sine wave power and extended runtime to support critical electronics during power disruptions. It comes with IEC 320 C20 input, 6x IEC 320 C13, and 2x IEC 320 C19 outlets. The UPS has a preinstalled Network Management Card for UPS network-based monitoring and management. The UPS comes with PowerChute Network Shutdown that provides graceful shutdown of physical servers, virtual machines, and HCI clusters. The UPS has built-in lithium-ion battery and is covered by a 5-year warranty. The UPS can connect to EcoStruxure IT or third-party centralized management platforms. The UPS has a 5-year warranty on the UPS and Lithium-ion battery. It conforms to CE and EAC. Designed for IT professionals or network administrators providing wide input voltage window, tight output voltage regulation, frequency regulation, internal bypass, and input power factor correction.

Automatic Voltage Regulation (AVR)Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.Wall-mount holesAllow flexibility for setup in tight locations and mounting on wall or other surfaces.Transformer-block spaced outletsProtect equipment with input transformer blocks without blocking access to other receptacles.Sleek designSlim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.Boost Automatic Voltage Regulation (AVR)Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.Cold-start capableProvides temporary battery power when the utility power is out.Advanced Safety FeaturesSafeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenanceIntelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.Battery and surge protected outletsBack up and protect your hardware and data during power outages, surges and spikes.Battery backup and surge protectionOutlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Security through emergency powerAn APC Easy-UPS has a built-in battery that ensures that all connected devices, such as a NAS, router, modem and media box, continue to work if the power goes out. This prevents downtime, damage to equipment, and loss of data.Safety and convenienceIn addition, this safe APC UPS protects valuable equipment against peak voltage caused, for example, by lightning strikes. Because the APC Easy-UPS BV500I-GR can also be mounted on the wall and is equipped with 4 rotated sockets (45°), this APC emergency power supply is also a suitable UPS for the meter cupboard.Expected battery lifeLoad in Watts, battery life in Minutes:10W = 100 Min.40W = 40 Min.80W = 18 Min.120W = 5 Min.180W = 3 Min.240W = 0.5 Min.Extends battery lifeThe AVR function extends both the expected battery life and the expected runtime by correcting both low and high voltages without discharging the battery.Warranty extensionThe factory warranty of the BV500I-GR is 2 years and you can upgrade to 5 years with the APC service pack (WBEXTWAR3YR-SP-01A).

APC Easy UPS On-Line SRV RM 2000 VA 230V with Rail Kit.High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions.Includes: CD with software, Rack Mounting support rails, User Manual.

Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS power overload or fault.2 years repair or replaceAutomatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.ECO ModeOperating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection.Input power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling.Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.LCD displayAlpha-Numeric Display which displays system parameters and alarms.Serial connectivityProvides management of the UPS via a serial port.USB connectivityProvides management of the UPS via a USB port (not available on all models).FeaturesManagement SoftwareAllows you to easily monitor your utility power and manage your UPS.ECO ModeOperating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection.Input power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling.High efficiencyHigh efficiency rates that remain stable even at lower operating power levels.SmartSlotCustomize UPS capabilities with management cards.Intuitive LCD interfaceProvides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.Double conversion on-line topologyGuarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process. The battery is only used as a back-up source.Generator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.Wide input voltage rangeDesigned for harsh electrical environments to save battery life.ServiceabilityDisconnected battery notificationWarns when a battery is not available to provide backup power.Audible alarmsProvides notification of changing utility power and UPS power conditions.Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Predicitive failure notificationProvides early-warning fault analysis ensuring proactive component replacement.ManageabilitySerial connectivityProvides management of the UPS via a serial port.SmartSlotCustomize UPS capabilities with management cards.LCD graphics displayText and mimic diagrams that display modes of operation, system parameters and alarms.Network manageableProvides remote power management of the UPS over the network.LED IndicatorsProvide easy-to-read status of the unit and utility power conditions.AvailabilityIntelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.

This APC Single phase Easy UPS is designed for IT professionals or network administrators to maintain business uptime and continuity. This 6kVA double-conversion on-line 5U rackmount UPS provides pure sine wave power and extended runtime to support critical electronics during power disruptions. The SRV comes with hard wire 3-wire(1P+N+E) input and hard wire 3-wire(1P+ N+E) outlet. The On-Line UPS has a intelligent card slot for optional Network Management Card (AP9544, SRVSMB001, VGL9601l) that enables network-based UPS monitoring and management. The UPS can connect to EcoStruxure IT or third-party centralized management platforms. The Built-in automatic and manual bypass provide seamless power to the load even in the event of an internal detected fault or error in UPS. The UPS is compatible with SRVRK1 and SRVRK2 rail kits sold separately. The UPS and the built-in lead-acid battery has a 2-year warranty. Ideal for small data centers, manufacturing facilities, computer rooms, network storage devices, telecommunication, and healthcare IT.