The QSW-M3212R-8S4T is a half-width rackmount managed switch with eight 10GbE SFP+ ports and four 10GbE RJ45 ports, providing SMB and SOHO users with additional ports for connecting 10GbE devices with different interfaces at an affordable price. Supporting Layer 2 switching and network management via a user-friendly web user interface, the QSW-M3212R-8S4T offers flexible deployment in high-speed network environments and provides an entry-level network management solution. With a half-width design, the QSW-M3212R-8S4T can be conveniently placed within working environments without taking up too much space, and two can be installed in a single 1U rack space. The QSW-M3212R-8S4T is Made in Taiwan (MIT), providing a high-quality and reliable networking solution.10G Multi-Gigabit connectivityIncludes eight 10GbE SFP+ fiber ports (backward compatible with 1G SFP) and four 10GbE RJ45 ports (backward compatible with 5G/2.5G/1G) for high-speed networks.User-friendly management interfaceThe QNAP Switch System (QSS) is easy to use and provides an overview dashboard, port management and setting guide, making central network management intuitive.Layer 2 networkProvides Layer 2 management features (such as LACP, VLAN, ACL and LLDP) for IT staff to efficiently control network bandwidth and enhance security.RSTPOne of the few web-managed switches that supports Rapid Spanning Tree Protocol (RSTP). Easily and efficiently deploy small/medium-scale networks that support expansion, redundancy, and loop prevention.Online firmware updateQSS can be updated with just one click, helping IT staff ensure their network security.Flow ControlCompliant with IEEE802.3x Flow Control in full-duplex mode, the QSW-M3212R-8S4T avoids packet loss from unparalleled bandwidth.Half-width design, two models in 1UWith a half-width rackmount design, a QSW-M3212R-8S4T can be installed in a 1U rack space with another half-width rackmount switch (such as QSW-M2106R-2S2T) for efficient physical space utilization and tidy cabling.Flexible 12-port 10GbE deployment with eight 10GbE SFP+ and four 10GBASE-T EthernetThe QSW-M3212R-8S4T provides eight 10GbE SFP+ ports and four 10GbE RJ45 ports for connecting various devices and enabling hybrid high-speed networks. With SFP+ interfaces, Direct Attach Copper (DAC) cables can be used for connecting directly to SFP+ devices. You can also use RJ45 ports to connect 10GBASE-T/NBASE-T™ devices through RJ45 Category 6a (or better) cabling. The switching capacity of the QSW-M3212R-8S4T is 320Gbps , supporting the full potential of each port.QSS: Human-centered settings guideThe QSW-M3212R-8S4T uses the QNAP Switch System (QSS), featuring an easy-to-use Web GUI with Layer 2 management and value-added functions to simplify network set up and management.Optimize network performance with bandwidth and packet controlThe QSW-M3212R-8S4T provides bandwidth and packet control functions (such as LACP, VLAN, QoS, and IGMP Snooping) to boost network performance through IP grouping and bandwidth management.Powerful security and system functionsThe QSW-M3212R-8S4T has powerful security and system functions (including ACL, LLDP, RSTP and Flow Control) to help administrators enhance network reliability using access controls, troubleshooting, loop prevention and avoiding packet loss.Dependable performance with effective heat dissipationWith a compact metal body that optimizes cooling performance, the QSW-M3212R-8S4T provides stable and reliable operations even when under full load. The front-panel LEDs also assist in viewing the current system status.Fully embrace high-speed networking with QNAP!QNAP offers comprehensive, budget-friendly storage and networking solutions that provide an array of connectivity possibilities. Easily and flexibly upgrade your workplace or home network now to handle bandwidth-hungry applications.QNAP high-speed switch solutions for diverse business network environmentsQNAP provides comprehensive enterprise managed and unmanaged switches with speeds ranging from 2.5GbE, 10GbE to 25GbE and covering PoE, industrial-grade, rackmount, and desktop models. QNAP’s all-inclusive high-speed switches assist businesses in quickly deploying high-speed network infrastructure, accelerating enterprise backbone, smart hotels, retail, and industry 5.0 applications.

Entry-level 10GbE and 2.5GbE Layer 2 Web Managed Half-Width Rackmount Switch for Small BusinessesThe QSW-M2108R-2C is a Layer 2 Web Managed Switch with two 10GbE SFP+/RJ45 combo ports and eight 2.5 Gigabit ports. Supporting Layer 2 switching and network management via a user-friendly web user interface, the QSW-M2108R-2C offers flexible deployment in hybrid high-speed network environments and provides an entry-level network management solution. With a half-width design, two QSW-M2108R-2C can be installed in a 1U rack space for space-saving. The QSW-M2108R-2C is compatible with 10GbE and NBASE-T technologies, supporting up to five speeds (10G / 5G / 2.5G / 1G / 100M) to provide higher transmission speeds when using existing Cat 5e and 6a cables.Half-width design, 2 models in 1UWith a half-width rackmount design, two QSW-M2108R-2C can be installed in a 1U rack space for efficient physical space utilization and tidy cabling.Flexible deployment with multiple 10G SFP+ fiber and Gigabit portsThe QSW-M2108R-2C provides two 10GbE SFP+/RJ45 combo ports and eight 2.5 Gigabit ports for connecting various devices and enabling hybrid high-speed networks. With SFP+ interfaces, Direct Attach Copper (DAC) cables can be used for connecting directly to SFP+ devices. You can also use RJ45 ports to connect 10GBASE-T/NBASE-T™ devices through RJ45 Category 6 (or better) cabling. The switching capacity of the QSW-M2108-2C is 80Gbps, guaranteeing the full potential of each port.Flexible deployment combo ports and 10GbE / NBASE-TThe QSW-M2108R-2C is compatible with 10GbE and NBASE-T technologies to support five speeds (10G / 5G / 2.5G / 1G / 100M) using existing Cat 5e and Cat 6a cables. The SFP+/RJ45 (copper) combo ports provide higher transmission speeds with existing cables. Depending on cable type and lengths, different speeds can be achieved for faster, more efficient data transfer.Fully embrace High-Speed Networking with QNAP!QNAP offers comprehensive, budget-friendly storage and networking solutions that provide an array of connectivity possibilities. Easily and flexibly upgrade your workplace or home network now to handle bandwidth-hungry applications.A fast NASA QNAP NAS with multiple 2.5GbE ports and Port Trunking allows you to combine multiple ports for greater bandwidth potential.Upgrade desktops and serversServers and desktops can install QNAP PCIe network cards that support 10G/5G/2.5G/1G/100M Multi-GigAdd a 5GbE port to laptopsLaptops and upgrade-limited computers can use the portable QNAP USB 3.2 Gen 1 to 5GbE adapter that allows you to connect to 5G/2.5G/1G/100M networks via USB.QSS: Intuitive Network Management SoftwareThe QNAP Switch System (QSS) features an easy-to-use Web GUI with value-added functions to simplify network set up and management.Sleek DesignUse the at-a-glance major functions, flat control layers and one-click login to simplify set up and management.GUIThe visual illustration matches physical ports for greater usability.Value-addedWith the settings guide, status chart reference, online firmware update, learning and management costs are greatly reduced.QSS: Human-centered settings guideQSS provides an overview dashboard, port management and setting guide to help administrators control Layer 2 networks.Optimize Network Performance with bandwidth and packet controlThe QSW-M2108R-2C provides bandwidth and packet control functions (such as LACP, VLAN, QoS, and IGMP Snooping) to boost network performance through IP grouping and bandwidth management.LACPLink Aggregation (LAG) combines multiple network connections to increase throughput and protect against connection failure.VLANVirtual Networks (VLAN) allows groups of devices from different networks to be combined into a single network.QoSQoS (Quality of Service) helps prioritize bandwidth usage to optimize network resource allocation.IGMP SnoopingIGMP snooping assists in minimizing bandwidth loss and preventing network information leakage.Powerful security and system functionsThe QSW-M2108R-2C has powerful security and system functions (including ACL, LLDP, RSTP and Flow Control) to help administrators enhance network reliability using access controls, troubleshooting, loop prevention and avoiding packet loss.ACL- Access controls- Security systemLLDP- Device disclosure- TroubleshootingRSTP- Loop prevention- Backup pathFlow Control- Balance speed- Jam preventionDependable performance with effective heat dissipationWith a compact metal body, the QSW-M2108R-2C provides stable and reliable operations while staying near-silent even when under full load. The front-panel LEDs also assist in viewing the current system status.

The QSW-308S is a 3-port 10G SFP+ and 8-port Gigabit Unmanaged Switch, allowing you to instantly upgrade to a hybrid high-speed network environment at a cost-effective price. With its desktop size and silent operation, the QSW-308S perfectly blends into homes and offices while providing high performance, low latency and superb functionality.Flexible deployment with multiple 10G SFP+ fiber and Gigabit portsThe QSW-308S provides three 10GbE SFP+ ports and eight Gigabit ports for connecting various devices and enabling a hybrid high-speed network in homes and offices. With SFP+ interfaces, direct attach copper (DAC) cables can be used for connecting directly to SFP+ devices. You can also use 10G-SFP-T copper transceiver modules to connect 10GBASE-T/NBASE-T™ devices through RJ45 Category 6, 5 or 5e cabling. The switching capacity of QSW-308S is 76Gbps, guaranteeing the full potential of each port.Improve your productivity with a 10GbE-enabled QNAP NASMany QNAP NAS series are designed with 10GbE readiness, and can be immediately upgraded by purchasing and installing a 10GbE network adapter. QNAP NAS are also available with 10GbE SFP+ and 10GBASE-T as standard to fully support 10GbE high-speed networks, making them beneficial for IOPS-demanding applications such as virtualization, databases, high-resolution video editing, and sharing workflows.Easily build a High-Speed Network with QNAP Network AdaptersQNAP provides a wide range of network devices to assist business and home users with upgrading their network infrastructure to meet growing bandwidth requirements. QNAP's Thunderbolt 3 to 10GbE Network Adapter provides a quick and budget-friendly method for laptops (and other upgrade-constrained devices) to take advantage of high-speed 10GbE connectivity.Cool and quiet operationThe QSW-308S features a fanless design for silent operations. The unique ventilated construction assists in cooling while maintaining high performance.Desktop size for easy use in homes and officesWith a compact and modern design, the QSW-308S fits perfectly alongside other devices in modern digital homes and offices. Featuring a delicate white polished or textured surface design, the QSW-308S helps users to easily identify each port. The flexible DC power connector also assists in universally deploying the QSW-308S.

The QSW-M2108-2C is a Layer 2 Web Managed Switch with two 10GbE SFP+/RJ45 combo ports and eight 2.5 Gigabit ports. Supporting Layer 2 switching and network management via a user-friendly web user interface, the QSW-M2108-2C offers flexible deployment in hybrid high-speed network environments and provides an entry-level network management solution that is usable even by non-IT professionals. The QSW-M2108-2C is compatible with 10GbE and NBASE-T technologies, supporting up to five speeds (10G / 5G / 2.5G / 1G / 100M) to provide higher transmission speeds with existing Cat 5e and 6a cables. With high performance, user-friendly management, and desktop form factor, the QSW-M2108-2C enables cost-effective upgrading to 2.5GbE or 10GbE networking while optimizing bandwidth and ensuring secure network maintenance.Flexible deployment with multiple 10G SFP+ fiber and Gigabit portsThe QSW-M2108-2C provides two 10GbE SFP+/RJ45 combo ports and eight 2.5 Gigabit ports for connecting various devices and enabling hybrid high-speed networks. With SFP+ interfaces, Direct Attach Copper (DAC) cables can be used for connecting directly to SFP+ devices. You can also use RJ45 ports to connect 10GBASE-T/NBASE-T devices through RJ45 Category 6 (or better) cabling. The switching capacity of the QSW-M2108-2C is 80Gbps, guaranteeing the full potential of each port.Flexible deployment combo ports and 10GbE / NBASE-TThe QSW-M2108-2C is compatible with 10GbE and NBASE-T technologies to support five speeds (10G / 5G / 2.5G / 1G / 100M) using existing Cat 5e and Cat 6a cables. The SFP+/RJ45 (copper) combo ports provide higher transmission speeds with existing cables. Depending on cable type and lengths, different speeds can be achieved for faster, more efficient data transfer.Fully embrace High-Speed Networking with QNAP!QNAP offers comprehensive, budget-friendly storage and networking solutions that provide an array of connectivity possibilities. Easily and flexibly upgrade your workplace or home network now to handle bandwidth-hungry applications.QSS: Intuitive Network Management SoftwareThe QNAP Switch System (QSS) features an easy-to-use Web GUI with value-added functions to simplify network set up and management.Sleek DesignUse the at-a-glance major functions, flat control layers and one-click login to simplify set up and management.GUIThe visual illustration matches physical ports for greater usability.Value-addedWith the settings guide, status chart reference, online firmware update, learning and management costs are greatly reduced.Optimize Network Performance with bandwidth and packet controlThe QSW-M2108-2C provides bandwidth and packet control functions (such as LACP, VLAN, QoS, and IGMP Snooping) to boost network performance through IP grouping and bandwidth management.Powerful security and system functionsThe QSW-M2108-2C has powerful security and system functions (including ACL, LLDP, RSTP and Flow Control) to help administrators enhance network reliability using access controls, troubleshooting, loop prevention and avoiding packet loss.Desktop form factor for easy use in officesWith a compact and modern design, the QSW-M2108-2C stands out with its delicate textured surface design. The flexible DC power connector enables universal deployment of the QSW-M2108-2C and each port can be easily identified. Being fully plug-and-play, devices can be simply connected to the QSW-M2108-2C and immediately used.

The QSW-M2108-2S is a Layer 2 Web Managed Switch with two 10GbE SFP+ ports and eight 2.5 Gigabit ports. Supporting Layer 2 switching and network management via a user-friendly web user interface, the QSW-M2108-2S offers flexible deployment in hybrid high-speed network environments and provides an entry-level network management solution that is usable even by non-IT professionals. With high performance, user-friendly management, and desktop form factor, the QSW-M2108-2S enables cost-effective upgrading to 2.5GbE or 10GbE networking while optimizing bandwidth and ensuring secure network maintenance.Flexible deployment with multiple 10G SFP+ fiber and Gigabit portsThe QSW-M2108-2S provides two 10GbE SFP+ ports and eight 2.5 Gigabit ports for connecting various devices and enabling hybrid high-speed networks. With SFP+ interfaces, Direct Attach Copper (DAC) cables can be used for connecting directly to SFP+ devices. You can also use RJ45 ports to connect 10GBASE-T/NBASE-T devices through RJ45 Category 6 (or better) cabling. The switching capacity of the QSW-M2108-2S is 80Gbps, guaranteeing the full potential of each port.Fully embrace High-Speed Networking with QNAP!QNAP offers comprehensive, budget-friendly storage and networking solutions that provide an array of connectivity possibilities. Easily and flexibly upgrade your workplace or home network now to handle bandwidth-hungry applications.QSS: Intuitive Network Management SoftwareThe QNAP Switch System (QSS) features an easy-to-use Web GUI with value-added functions to simplify network set up and management.QSS: Human-centered settings guideQSS provides an overview dashboard, port management and setting guide to help administrators control Layer 2 networks.Optimize Network Performance with bandwidth and packet controlThe QSW-M2108-2S provides bandwidth and packet control functions (such as LACP, VLAN, QoS, and IGMP Snooping) to boost network performance through IP grouping and bandwidth management.Powerful security and system functionsThe QSW-M2108-2S has powerful security and system functions (including ACL, LLDP, RSTP and Flow Control) to help administrators enhance network reliability using access controls, troubleshooting, loop prevention and avoiding packet loss.Desktop form factor for easy use in officesWith a compact and modern design, the QSW-M2108-2S stands out with its delicate textured surface design. The flexible DC power connector enables universal deployment of the QSW-M2108-2S and each port can be easily identified. Being fully plug-and-play, devices can be simply connected to the QSW-M2108-2S and immediately used.

The QNAP QGD-1602P is the world’s first PoE managed switch series that supports Virtual Machines (VMs). Featuring 2.5GbE and 10GbE SFP+ ports and up to 90-watt PoE output, the QGD-1602P allows you to build a high-speed and high-power PoE network infrastructure for Wi-Fi 6 Access Points and Routers. With a dual-CPU design, the QGD-1602P uses Intel Atom multi-core 2.2GHz processors with two SATA drive bays to support VM and QTS applications. The QGD-1602P not only fulfills IP surveillance, network security, wireless AP management, and storage expansion applications, but also integrates QuWAN to form a SD-WAN architecture with other QNAP devices across multiple sites, helping to build a resilient and secure IT infrastructure. With 20GbE internal bandwidth capacity and Intel® QuickAssist Technology (Intel QAT), the QGD-1602P achieves the high-performance transmission required for edge computing virtualization and IPsec VPN, and offers SMBs a cost-optimized and centrally managed LAN deployment solution.2.5GbE PoE Switch for Wi-Fi 6 APs & RoutersThe QGD-1602P breaks through bandwidth limitations of connecting cabled and wireless networks to enhance your storage and access experience. With eight 2.5GbE ports, the QGD-1602P supplies up to 90 watts of PoE per port and a total power budget of 380 watts to meet the demands of high-power Wi-Fi 6 APs. The QGD-1602P can also be connected to a QHora Wi-Fi 6 Router via its 10GbE SFP+ ports or 5GbE host ports to offer Wi-Fi 6 network in home or office environments. Featuring diverse high-speed network interfaces, the QGD-1602P provides a comprehensive Wi-Fi 6 wireless network infrastructure solution for small-to-medium-scale businesses, hotels and stores. Coupled with QNAP’s QuWAN SD-WAN solution, the QGD-1602P greatly enhances wireless LAN efficiency from optimized WAN bandwidth.Upgraded performance for smoother virtualizationThe QGD-1602P provides a full upgrade of network speeds, performance and memory, which not only greatly enhances the network transmission speeds of edge devices, but also optimizes the capabilities of running multiple virtual machines and containers for highly-efficient virtualization applications.Sturdy hardware with Intel QAT for optimized performanceThe QGD-1602P uses Intel Atom C3000 series multi-core 2.2GHz processors, has two SATA drive bays, and provides and two M.2 NVMe SSD slots for SSD caching to increase IOPS performance. Two PCIe Gen3 x2 slots allows users to install 10GbE network cards, QM2 dual-port M.2 SSD/10GbE cards, USB 3.2 Gen 2 (10Gbps) cards, or Wireless Adapters to boost core functionality. The QGD-1602P also supports Intel QuickAssist Technology (Intel QAT) to greatly enhance IPsec VPN performance.The First PoE Switch Series with VM SupportThe Guardian supports QNAP’s QTS operating system and is the world’s first PoE switch series that can host virtual machines, containers, and provide other cloud applications - enabling diverse networking and storage solutions. In addition to QuWAN, QVR Pro, HybridMount, and other applications, the included App Center also supports VMs for running many open-source software applications. The Guardian provides SMBs with not only an all-in-one networking solution for IP surveillance, storage expansion, network security, and wireless LAN management, but also a SD-WAN solution for connecting to other QNAP devices at multiple sites. The dual-processor Guardian enables you to independently run the networking management interfaces (QSS - QNAP Switch System) and QTS. The Guardian provides a user-friendly web interface, QuNetSwitch, to help SMBs deploy a flexible and secure IT infrastructure.Deploy a multi-site VPN with SD-WAN solutionThe QGD-1602P and other QNAP solutions now support QuWAN – QNAP’s SD-WAN solution. QuWAN provides full mesh IPsec VPN topology between QNAP devices based in multiple sites to fulfill enterprise video, VoIP, ERP system data, and filing needs. QuWAN adopts software-defined networking to achieve optimum network connectivity, and supports cloud-centric management for deploying a resilient IT Infrastructure.Dual-system of Switch & NAS, enabling optimum performanceThe QGD-1602P features dual system design, multi-port capability and expandable architecture, enabling optimum transmission and flexibility to fulfill business needs in performance and application diversification.Intelligent PoE Management of up to 90W high-power devicesThe QGD-1602P is compliant with the IEEE 802.3bt PoE++ and IEEE 802.3at PoE+ standards, offering 4-port 90-watt and 12-port 30-watt PoE capabilities. The QGD-1602P can supply a total power budget of 370 watts to meet the demands of many high-power devices (PDs) (such as 4K IP cameras, wireless APs, IP phones, LED lights, and digital signage). The QGD-1602P supports intelligent PoE management functions, including scheduling, power supply prioritization, and power enabling and disabling. You can obtain the real-time network connection status and power consumption information of PDs and configure PDs simultaneously to promote an energy-saving PoE network.Faster wired and wireless transmissionThe QGD-1602P has eight 2.5GbE ports and eight Gigabit PoE ports for connecting various high-speed powered devices. Two in-built 10GbE SFP+ ports can serve as uplink ports to the Internet and core networks or simply be connected to routers and LAN Fiber switches. The additional two 5GbE and two Gigabit host management ports can be connected to multiple hosts or LAN devices to improve LAN efficiency. The switching capacity of QGD-1602P is 96Gbps, guaranteeing the full potential of each port. By installing an 802.11ac Wireless Adapter and the WirelessAP Station App, the QGD-1602P can work as an access point for connecting multiple edge devices and offer wireless speeds up to 2533Mbps.20GbE Internal Bandwidth for Virtualized ApplicationsQTS can directly access to and control the data processed in QSS using Virtual Switches. The QGD-1602P provides 20GbE internal bandwidth to accelerate computing between end devices and hosts. The additional two 5GbE and two Gigabit host management ports can also be connected to multiple hosts for deploying multiple virtual machines.QuNetSwitch: Layer 2 Management with User-friendly Web GUIThe QGD-1602P provides comprehensive Layer 2 management features (including VLAN, LACP, and LLDP) for efficient control of networks through IP grouping and bandwidth management. Powerful security functions (including IGMP Snooping, static MAC, QoS, and Wake-on-LAN) are also suitable for simple networking environments and easy deployment. Aside from the QNAP Switch System (QSS), the QGD-1602P also offers the user-friendly web interface software QuNetSwitch (via QTS) to help IT staff control Layer 2 management and PoE networks. The overview dashboard and statistical analysis area displays all the information about the switch and PDs at a glance, making centralized management of powered devices intuitive and easy.The Guardian Smart Edge PoE Switch meets all your business needs.The QGD-1602P is a one-stop central networking solution that offers flexible power supply, Web-based management, and innovative virtualization applications to solve various networking problems.Smart HotelsHotel staff and customers can benefit from a smart access control system. Customers can check in with self-help kiosks upon arrival while browsing through room details and service packages. Wi-Fi should also be provided for customers to check information and contact customer service. Customer data also needs to be securely stored, while a surveillance system is necessary to ensure security.Business Digital TransformationIT staff in small businesses often need to set up file servers for employees to centrally store files. You also need to create networks for connecting equipment such as printers and VoIP phones. Firewalls are crucial in information security for mitigating attacks and threats. VPN connections are also necessary for secure remote file transfers between offices, sites, and remote workers.Smart RetailDigital signage is a convenient way to display menus/inventory and current offers. The POS system must also be constantly connected to ensure sales data is saved. An NVR surveillance system is also required to ensure customer, staff, and environmental security. These services can also use Wi-Fi for ease of use.

To embrace the new normal of remote working, businesses must deploy both a remote VPN that is quickly accessible by multi-location users, and a high-speed in-premises solution covering wired and wireless connections. The QHora-301W supports high-speed Wi-Fi 6 and 10GbE connections, while also providing an enterprise-grade SD-WAN VPN to allow multi-site VPN deployment via the cloud. Combined with a budget-friendly price, the QHora-301W is a solid foundation for building a next-generation network.Welcome to a New Age of Routers!QNAP’s next-generation routers go beyond simple IP settings and Wi-Fi connectivity, with the QHora-301W offering an all-in-one solution by integrating amazing new technologies for remote multi-site VPN, and high-speed wired and wireless connectivity.10GbE for flexible high-speed LAN/WAN deploymentThe QHora-301W has two 10GbE ports for flexible LAN/WAN deployment.Better coverage and faster Wi-Fi 6 connectivityThe QHora-301W supports Wi-Fi 6 dual-band 802.11ax (2.4GHz & 5GHz) - 1.38x transfer than Wi-Fi 5.Subscription-free SD-WAN for multi-site VPNSD-WAN is not just for high-end enterprises. The QHora-301W includes QNAP’s QuWAN solution to simplify remote VPN connections across multiple locations.Optimized hardware performance for efficient wired and wireless networkingThe QHora-301W pairs an enterprise-grade Qualcomm Quad-core 2.2 GHz processor with 1GB RAM, providing support for Wi-Fi 6 (802.11ax) and up to 3600Mb/s dual-band (2.4GHz & 5GHz) transfer speeds. With two 10GbE ports and four Gigabit ports, the QHora-301W enables flexible LAN/WAN deployment and optimized wired network performance.Built-in antennas for high-coverage Wi-Fi signalsWith eight antennas, the QHora-301W provides the perfect wireless pattern view and supports Wi-Fi 6 for high-coverage Wi-Fi signals.Quiet and cool operationsThe QHora-301W features a fanless design for near-silent operations. Even when connected to multiple devices, the QHora-301W maintains dependable performance for offices and homes.VESA-mount design for flexible deploymentWith a modern appearance and fanless design, the QHora-301W fits perfectly alongside other devices in modern digital homes and offices. The QHora-301W can be installed anywhere, from desk tops to walls, ceilings and under tables with VESA mounting, for efficient space utilization.

With five 2.5GbE ports, the QNAP QSW-1105-5T switch instantly upgrades your network to take advantage of 2.5GbE-enabled devices and NAS without requiring any new network cables. Featuring a near-silent fanless design and plug-and-play set up, the QSW-1105-5T provides network loop detection and blocking functions, making it easy for you to create an affordable high-speed network environment for your home or business.Up to 2.5 times fasterThe QSW-1105-5T has five 2.5GbE ports that support existing Ethernet devices and are ready for next-generation 2.5GbE devices. Whether you are upgrading your network for business or personal use, the QSW-1105-5T provides a solid foundation for enabling faster and smoother productivity and entertainment. Future-proof your network environmentQNAP offers comprehensive, budget-friendly storage and networking solutions that provide an array of connectivity possibilities. Easily and flexibly upgrade your workplace or home network now to handle bandwidth-hungry applications.Affordable network upgradeUpgrading your network shouldn’t break the bank, and 2.5GbE connectivity provides immediately noticeable improvements compared to standard 1GbE. You can even use your existing CAT 5e cables to immediately take advantage of higher transfer speeds.Instantly build a plug-and-play high-speed networkNo complex settings are required to use the QSW-1105-5T - simply connect your devices and it’s ready to use. The QSW-1105-5T supports auto-negotiation that optimizes transfer speeds and performance for each connected device, while its built-in management mechanism ensures smooth transmission of network packets during periods of heavy usage.Loop detection and blockingThe QSW-1105-5T features network loop detection. If a network loop is detected, the QSW-1105-5T automatically locks the looped ports to ensure the network environment quickly resumes normal operation.Cool and quiet operationThe QSW-1105-5T features a fanless design for near-silent operation. The unique ventilated construction assists in cooling while maintaining high performance.Upgrade all your devices!QNAP offer a wide range of affordable network solutions, including adapters and expansion cards for you to easily add high-speed network connectivity to your NAS, laptops, and desktops.

QSW-M7308R-4XHalf-width Rackmount 100GbE L3 Lite Managed Switch, cost-optimized for enterprise ITThe QSW-M7308R-4X is a 100GbE L3 Lite Managed Switch with four 100GbE QSFP28 and eight 25GbE SFP28 ports. The QSW-M7308R-4X can uplink to 100G/25G servers and NAS in server rooms or connect to 100G/25G switches to accelerate high-speed storage, video editing, virtualization, and AI applications. With competitive pricing, space-saving features and MC-LAG switch redundancy ensuring continuous network, the QSW-M7308R-4X enables businesses to quickly upgrade to an ultra-high-speed backbone network infrastructure for building secure and reliable high-speed network transmission and storage solutions. The QSW-M7308R-4X is made in Taiwan (MIT), providing a high-quality and reliable networking solution.Embrace the ultra-high-speed 100GbE network generation!According to market research, the demand for 100GbE switches has taken off in 2023. Enterprises, hyperscalers, and service providers worldwide continue to invest in higher-speed network infrastructure to support higher-speed servers and higher bandwidth demands of new applications such as Generative AI workloads.

The QSW-M408S is a Layer 2 Web Managed Switch equipped with four 10GbE SFP+ ports and eight Gigabit ports. Supporting Layer 2 switching and network management via a user-friendly web user interface, the QSW-M408S offers flexible deployment in hybrid high-speed network environments and provides an entry-level network management solution that is usable even by non-IT professionals. With its high performance, user-friendly management features and desktop size, the QSW-M408S allows you to instantly upgrade to a hybrid high-speed network environment at a cost-effective price, while optimizing network bandwidth and ensuring network maintenance security.Flexible deployment with multiple 10G SFP+ fiber and Gigabit portsThe QSW-M408S provides four 10GbE SFP+ ports and eight Gigabit ports for connecting various devices and enabling hybrid high-speed networks. With SFP+ interfaces, direct attach copper (DAC) cables can be used for connecting directly to SFP+ devices. You can also use 10G-SFP-T copper transceiver modules to connect 10GBASE-T/NBASE-T devices through RJ45 Category 6, 5 or 5e cabling. The switching capacity of QSW-M408S is 96Gbps, guaranteeing the full potential of each port.QSS: Intuitive Network Management Software with Web GUIThe QSW-M408S uses the QNAP Switch System (QSS), which features an easy-to-use Web GUI with value-added functions to simplify network set up and management.Sleek DesignUse the at-a-glance major functions, flat control layers and one-click login to simplify set up and management.GUIThe visual illustration matches physical ports for greater usability.Value-added FunctionsWith the setting guide, status chart reference, online firmware update, the learning and management costs are greatly reduced.QSS: The human-centered setting guideQNAP Switch System (QSS) provides an overview dashboard, port management and setting guide to help administrators control Layer 2 networks.Optimize Network Performance with bandwidth and packet controlThe QSW-M408S provides bandwidth and packet control functions (such as LACP, VLAN, QoS, and IGMP Snooping) for boosting network performance through IP grouping and bandwidth management.Powerful security and system functionsThe QSW-M408S has powerful security and system functions (including ACL, LLDP, RSTP and Flow Control) to help administrators enhance network reliability using access controls, troubleshooting, loop prevention and avoiding packet loss.Improve team productivity with a 5GbE/ 10GbE High-Speed NetworkFrom NAS with built-in 10GbE SFP+ and 10GBASE-T ports, or NAS with PCIe slots that support 10GbE/5GbE/2.5GbE network adapters, QNAP has led the industry in 10GbE adoption. Other high-speed network solutions from QNAP include Thunderbolt 3 to 10GbE Network Adapters and USB 3.2 Gen 1 to 5GbE Network Adapters. These can all be used with the QSW-M408S to create a comprehensive high-speed network environment for boosting the performance of photo/video editing, virtualization, large-file data transfers, and other bandwidth-demanding tasks.Desktop size for easy use in officesWith a compact and modern design, the QSW-M408S fits perfectly alongside other devices in modern digital offices. Featuring a delicate white or textured surface design, the QSW-M408S helps users to easily identify each port. The flexible DC power connector also assists in universally deploying the QSW-M408S. Being fully plug-and-play, simply connect the QSW-M408S to your devices and it will do the rest.