Enhance the performance capabilities of SWDM applications over an OM5 fiber networkOM5 LC to LC Multimode Duplex Fiber Optic Patch cable facilitates connectivity across 40G and 100G networks. It supports SWDM (Shortwave Wavelength Division Multiplexing) across an extended wavelength range of 850-953nm VCSEL, enhancing signal quality and performance capacity over OM4.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure correct fiber alignment to prevent connectivity issues and minimize insertion loss. Designed for reliability in high-density network applications, the LC to LC UPC polished fiber ends greatly improves return loss characteristics over older PC polishing techniques. The Laser-Optimized Multi-Mode Fiber (LOMMF) OM5 fiber patch cable is ideal for 850-953 nm Vertical-Cavity Surface-Emitting Laser (VCSEL) and 1300 nm LED sources.CompatibilityThis multimode 50/125µm fiber optic patch cord is backward compatible with OM4 and OM3 10G networks, ensuring a reliable connection in legacy fiber environments.LSZH Cable JacketHoused in a LSZH (Low-Smoke, Zero-Halogen) flame-retardant jacket, the OM5 fiber cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OM5 fiber cable is also individually tested for insertion loss performance that meets or exceeds the TIA/EIA-568 industry standard, for guaranteed compatibility and 100% reliability.The StarTech.com Advantage

This is a Dell® DAC-QSFP28-100G-1M compatible 100GBase-CU QSFP28 to QSFP28 direct attach cable that operates over passive copper with a maximum reach of 1.0m (3.3ft). It has been programmed, uniquely serialized, and data-traffic and application tested to ensure it is 100% compliant and functional. Our direct attach cables are built to comply with MSA (Multi-Source Agreement) standards. The actual part shipped may have a different part number, but will be functionally identical and 100% compatible. All of our twinax and AOC cables are Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty.

Connect a USB Mouse to a computer through a PS/2 portStarTech.com's Replacement USB to PS/2 Mouse Adapter converts a USB-A (male) connector into a PS/2 (male) connector, allowing you to plug your USB mouse into a PS/2 port.This high quality USB-PS/2 mouse adapter is designed as a replacement for a product that originally shipped with a USB to PS/2 converter, and is backed by Lifetime Warranty.Please Note: This product is designed as a replacement adapter for a mouse that originally shipped with a USB-PS / 2 adapter. If your product did not ship with an adapter, we suggest trying StarTech.com 's PS22USB" text="PS22USB instead.The StarTech.com Advantage- Plug your USB mouse into a PS/2 port by converting a USB-A (male) connector into a PS/2 (male) connector- Easy to use and install- Backed by StarTech.com's lifetime warranty

These 10G Passive SFP+ Twinaxial Direct Attach Cables are designed to support connections for 10 Gbps Gigabit Ethernet or Gigabit Ethernet switches with 10 Gbps Gigabit Ethernet uplink, much more faster than SFP which only supports 2.5 Gbps Gigabit Ethernet. With two cable models including the DEM-CB100S and DEM-CB300S, these cables are suitable for short distances up to 3 metres, and is ideal for highly cost-effective networking connectivity between switches and servers within a rack or in adjacent racks. These 10G Passive SFP+ Twinaxial Direct Attach Cables are certified to be compatible with D-Link products to provide you best performance and reliability.Ideal for High-Bandwidth OperationsThese D-Link 10G Passive SFP+ Twinaxial Direct Attach Cables support speeds of up to 10 Gbps, while having lower latency and power consumption than other cables types such as 10GBASE-CX4 and CAT6/CAT6A 10GBASE-T. This makes it an optimal solution for handling high bandwidth transmission within short distances such as inside energy-efficient data centres.Enhanced Small Form-factor Pluggable FormatThese D-Link 10G Passive SFP+ Twinaxial Direct Attach Cables use Enhanced Small Form- factor Pluggable format (SFP+) connectors. The SFP+ form factor is smaller than other form factors such as Xenpak, X2, and 10G XFP, resulting in lower costs, lower power disruption, and higher port density. Meanwhile SFP+ connectors use the same space-per-port as standard SFP connectors but support higher data transmission speeds.Save on CostsThese D-Link 10G Passive SFP+ Twinaxial Direct Attach Cables feature SFP+ connectors onboth ends, thus eliminating the need for expensive SFP+ transceivers. This makes it morecost-effective than fibre cables which must use SFP+ transceivers.

Connect your SFF-8088 SAS storage devices with a high-performance, TAA-Compliant solutionThe ISAS88881 1m External SAS Cable is designed for high-performance networks, servers, workstations and desktops, supporting data transfer rates of up to 6 Gbps.This durable Mini SAS cable features SFF-8088 to SFF-8088 plugs for connecting your external SAS devices (controllers, hard drives, SAN storage area network, etc.), and it is TAA-compliant for Federal (GSA Schedule) purchases.Constructed of high quality materials this 1-meter SAS cable is backed by StarTech.com's Lifetime Warranty.The StarTech.com Advantage- TAA-compliant for Federal (GSA Schedule) purchases- Prevent accidental disconnections with latching connectors- Guaranteed reliability