FS710 series- 802.1x auth with EAPOL passthrough When 802.1x authentication is executed, EAPOL packets is sent from supplicant.However if the switch does not support EAPOL passthrough, EAPOL and EAP packets is forwarded to Authenticator. As a result, authentication does not start.FS710 series supports EAPOL passthrough, so it is suitable as HUB when using 802.1x auth with EAP.

Switching engineered for 1G AV over IP with rear-facing ports ensuring a clean integration in AV racks. Pre-configured for out of the box functionality!Groundbreaking AV GUIA simplified user interface makes it easy to assign configuration profiles to each port.Multicast in an InstantNETGEAR IGMP Plus™ provides multicast functionality right out of the box for most AV over IP applications.Sleek, Quiet DesignLess fan noise, and mounting ears included for under-table or wall mounting.Automatic ConfigurationAuto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.FAST, EASY CONFIGURATION FOR AV PROSA streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.FOCUS ON THE EVENT NOT FAN NOISEMost models have quiet mode which greatly reduces fan noise, and some models are even fanless.DESIGNED FOR AV OVER IP RIGHT OUT OF THE BOXWith built-in NETGEAR IGMP Plus™, there's little-to-no setup required for flawless Video over IP delivery. Enable multicasting right out of the box.

Super-Fast Mesh Network for your HomeNighthawk® X6 Tri-band WiFi Mesh Extender creates powerful whole home WiFi using your existing WiFi. EX7700 is one of the most advanced tri-band WiFi mesh extenders that includes a dedicated 866Mbps 5GHz band for extending Internet speeds to your devices. Patented FastLane3™ Technology with dedicated WiFi Link avoids cutting the extended WiFi bandwidth in half. Smart Roaming intelligently connects your mobile devices to the optimal WiFi for superior streaming as you move around your house. Use the same WiFi name and password for seamless connectivity as you roam around the house. Secure Boot feature on the Nighthawk X6 Mesh extender ensures that only NETGEAR signed software can run on the device.Works with Your WiFi Router or ISP GatewayNot getting enough WiFi from your Internet Service Provider (ISP) equipment? Get a Tri-band WiFi Range Extender and boost WiFi coverage into every corner of your house and use the same WiFi name. This Nighthawk Mesh extender improves the WiFi you already have.Ultimate Speed and Range without Bandwidth DropTri-band WiFi Range Extender has patented FastLane3 technology which features Tri-Band WiFi with speeds up to 2.2Gbps, a Dedicated WiFi Link to the router to avoid halving of bandwidth of extended WiFi signals and innovative antenna design for ultimate coverage. Now you get a congestion free path for all your devices to connect to the internet.No More Switching WiFi Network NamesNighthawk X6 Mesh Extender creates a seamless network throughout your home by using the same WiFi network name (SSID) as your router.Your WiFi devices like the smartphones and laptops will remain connected to the same network name as you move around your house and yard.Other extenders create separate WiFi network name (SSID) than the router’s WiFi, causing disconnect and reconnect.Seamless Coverage for Your Mobile DevicesSmart Roaming intelligently connects your mobile devices to the optimal WiFi for 4K streaming, surfing and more. Now you can enjoy uninterrupted streaming on YouTube or Netflix, even as you move around the house.Smart Roaming is designed for devices that support the 802.11k standard.CONNECT MOREConnect your Smart TVs and game consoles to the one of the two gigabit Ethernet ports. Intelligent LED indicators help in optimal placement of the extender.2.2Gbps Wireless Access Point for Your EthernetDo you have a pre-wired home? Easily create a tri-band access point using a wired Ethernet connection. Pair with your existing ISP modem to enhance WiFi for your small office or home office and expand your network.Nighthawk Router + Nighthawk Mesh ExtenderLove your Nighthawk router? Now you can easily build your own powerful Nighthawk Mesh network.Enjoy all the advanced router features that a Nighthawk has to offer and easily build your own powerful WiFi network by adding the Tri-band WiFi Range Extender. Now you have the flexibility to customize networks in 2.4 and 5GHz. Use your existing router's SSID to create a single network or use multiple SSIDs to create separate networks.Ideal UsesGAMING & STREAMINGWith combined WIFi speeds up to 2.2Gbps, a quad-core processor, and advanced features like MU-MIMO and Smart Connect, you can now enjoy extreme gaming and 4K streaming anywhere in your home.SEAMLESS COVERAGEStream music in your backyard, video chat in your kitchen, or play online games in the basement. Get seamless WiFi coverage in your garage, second floor or in your extended gu...ULTIMATE CONNECTIVITYExtend WiFi to your smart home devices in your home network. Enjoy strong wireless connectivity indoors for your Smart TV, thermostat to your lights and security cameras outdoors.

The TL-SG1024D 24-Port Gigabit desktop/rack-mount switch provides an easy way to make the transition to Gigabit Ethernet. All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SG1024D can save up to 20%* of the power consumption, making it an eco-friendly solution for your business network.Gigabit SwitchFeatured with 24 10/100/1000Mbps ports, TL-SG1024D greatly expands your network capacity, enabling instant large files transferring. So，power users in the home, office, workgroup, or creative production environment can now move large, bandwidth-intensive files faster. Transfer - graphics, CGI, CAD, or multimedia files across the network instantly.GO GREEN WITH YOUR ETHERNETYou now have the choice to go green when upgrading to a gigabit network! This new generation TL-SG1024D 24-Port Gigabit desktop/rack-mount Switch features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network.Power down Idle PortsWhen a computer or network equipment is off, the corresponding port of a traditional switch will continue to consume considerable amounts of power. The TL-SG1024D can automatically detect the link status of each port and reduce the power consumption of ports that are idle.Power Budget According to Cable LengthIdeally, shorter cables would use less power because of less power degradation over their length, this is not the case with most devices as they will use the same amount of power across the cable regardless of whether it is 10 or 50 meters in length. The TL-SG1024D analyzes the length of the Ethernet cable connected and adjusts the power usage accordingly, rather than keeping the power consumption in a conventional solution.Easy to UseThe auto features of this gigabit switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminates the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (either 10, 100 Mbps or 1000 Mbps) and intelligently adjusts for compatibility and optimal performance.Features- Innovative energy-efficient technology saves power up to 20%;- Supports IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode;- Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput;- 48Gbps Switching Capacity;- 10K Jumbo frame improves performance of large data transfers;- Auto-MDI/MDIX eliminates the need for crossover cables;- Supports MAC address auto-learning and auto-aging;- Store and forward Switching scheme;- Auto-negotiation ports provide smart integration between 10Mbps, 100Mbps and 1000Mbps hardware;- Desktop and Rack-mountable design;- Plug and Play design simplifies installation.

The DGS-1210 Series Smart Switches is the latest generation of D-Link Smart Switches featuring D-Link Green 3.0 technology. The series offers a high level of energy saving and efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv6 management and configurations ensures your network remains protected after the upgrade from IPv4 to IPv61. By offering multiple management options, the Smart Switches allows quick deployment, infrastructure expansion, and seamless function upgrades. Built for small and medium-sized businesses, the DGS-1210 Series Smart Switches provide functionality, security, and manageability for a fraction of the standard cost of ownership.The DGS-1210 Series Smart Switches includes a range of affordable PoE-enable switches for businesses looking to power VoIP phones, wireless access points or network cameras. The DGS-1210-08P1 is a 8-port Smart PoE Switch that provides 8 PoE-enabled ports that can supply power of up to 15.4 W each. Whereas the DGS-1210-24P1 is a 24-port Smart PoE Switch that provides 12 PoE-enabled ports that can support up to 30 W of power output following IEEE 802.3at standard. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs.Easy ManagementThe D-Link Smart Switches series is designed for easy management. All configurations can be made through a Web interface regardless of the host PC’s operating system. Furthermore, the web UI contains ten language options to make operations more straightforward. During the first installation, the D-Link Network Assistant2 will automatically discover all D-Link Smart Switches in the network, allowing administrators to assign IP addresses and the subnet mask quickly. It also allows simultaneous firmware upgrades to multiple switches, saving a great deal of time. The D-Link Network Assistant1’s important management commands, such as downloading firmware or a configuration file, offer a sophisticated method of batch operations for multiple switches.Energy SavingDGS-1210 switches are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1210 switches offer advanced power-saving settings including port shutoff and standby, LED shutoff, and system hibernation based on custom scheduling profiles. The profiles can also be applied to the PoE switch so that there is no unnecessary power consumption during off hours. The DGS-1210 Series switches can also detect the length of connected cables to automatically reduce power usage on shorter cable connections.Auto Surveillance VLAN and Voice VLANThe process of setting up IP surveillance and VoIP on a network is automated with the D-Link Smart Switches. Auto Surveillance VLAN (ASV) consolidates data and surveillance video transmission through the network, sparing businesses the expense of maintaining dedicated facilities. ASV also protects the quality of real-time video by grouping IP surveillance devices on a single high priority VLAN. This ensures that surveillance video streams will not be affected when ordinary data traffic is at their highest levels. Similarly, the Auto Voice VLAN guarantees clear audio quality and efficient transmission for all voice communication.Exclusive Layer 2 FeaturesEquipped with a complete lineup of L2 features, the DGS-1210 Series switches include IGMP Snooping, Port Mirroring, Spanning Tree, and Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port and automatically shut down the affected port. The Cable Diagnostic feature is designed primarily for administrators and customer service representatives, and can rapidly discover the type of error and determine the cable quality.Secure your NetworkD-Link’s innovative Safeguard Engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network clients to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and protects the network by screening traffic from illegal MAC or IP addresses. ARP Spoofing Prevention prevents malicious intruders from sending massive fake ARP messages through a manipulated source. This protects important data from being stolen by Man-in-the-Middle attacks, and prevents wasting CPU cycles on these packets. For added security, the DHCP Server Screening feature blocks rogue DHCP server packets from user ports to prevent unauthorized IP assignment.

The TL-SG105PE is an 5-port Gigabit Easy Smart Switch with 4 PoE+ ports, represents a powerful upgrade from an unmanaged switch. It is designed specially for small businesses that require simple network management and PoE function. The TL-SG105PE can connect and power up to four PoE devices, such as wireless access points (APs), IP cameras, and IP phones. Through its web-based user interface and management utility, the TL-SG105PE offers a variety of useful features, including network monitoring, traffic prioritization, PoE Auto Recovery and enhanced QoS. Additionally, with port-based, tag-based and MTU VLAN, TL-SG105PE can improve security and meet more network segmentation requirements.Power Over Ethernet4 of the 5 Auto-Negotiation RJ45 ports (port 1 to port 4) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af/at compliant Powered Devices (PDs).Overload ArrangementTL-SG105PE has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is >= 65 W, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.Intelligent Power ManagementPriority (port 1>port 2>port 3>port 4): This function will help protect the system if the system power becomes overloaded. For example, Port 1, 2 and 4 are consuming 15.4 W respectively. If an additional PoE device with 20 W is inserted to port 3, the system will cut off the power of port 4 to compensate for the overload.Effective ManagementTL-SG105PE offers network monitoring for users to observe traffic behavior. Through its web-based user interface and management utility, the TL-SG105PE offers a variety of useful features, including network monitoring, traffic prioritization, PoE Auto Recovery and enhanced QoS.With Port Mirroring, Loop Prevention and Cable Diagnostics features, TL-SG105PE can identify and even locate connection problems on your business network. Also, administrators can designate the priority of the traffic based on Port Priority, 802.1P Priority and DSCP Priority, to ensure that voice and video are always clear, smooth and lag-free.Additionally, to improve security and network performance, TL-SG105PE supports MTU VLAN, port-based VLAN and 802.1Q-based VLAN functions. PoE Auto Recovery automatically reboots your dropped or unresponsive PoE-powered devices.TL-SG105PE is an upgrade from the plug-and-play Unmanaged Switch, delivering great value while empowering your network and similarly delivering great value to the end user.Easy to UseTL-SG105PE is easy to use and manage. Auto MDI/MDI-X crossover on all ports eliminate the need for crossover cables or uplink ports. Auto-negotiation on each port senses the link speed of a network device (either 10, 100, or 1000 Mbps) and intelligently adjusts for compatibility and optimal performance. Its compact size makes it ideal for desktops with limited space. Dynamic LED lights provide real-time work status display and basic fault diagnosis.